Shopping Cart

0 item $0.00
There are 0 item(s) in your cart
Subtotal: $0.00

Audison SR1.500.2 1000 Watt Amplifier

Audison SR1.500.2 1000 Watt Amplifier


SKU: SR1.500.2
Product by:

A revolutionary new way to get excellent performance and great value in one package. Hertz Compact Power amplifiers are highly adaptable and have comparably high power levels; all are offered in a line of very competitive models, for any budget. Minimized sizes have been achieved by using both D and AB Class circuits.

0 out of 5

Free Shipping


SKU: SR1.500.2


sku: SR1.500.2

0 out of 5


Share on facebook
Share on twitter
Share on pinterest
SKU SR1.500.2 Categories , , ,


Power Output


OUTPUT POWER (RMS) @14.4 VDC, 1% THD: 500 W x 1 Ch
SN ratio (ref. 1 W output) 75 dBA
1 500 x 1 (4 Ω)
1 800 x 1 (2 Ω)
1 1000 x 1 (1 Ω)
USS – Universal Speakers Simulator

Thanks to the integration of Audison USS technology (Universal Speakers Simulator) in the high-level inputs, the SR amplifiers can also be appropriately connected to OEM sources featuring the “speaker load detection” function that monitor the presence of a low-impedance load to enable audio outputs.

ADT – Audison D-Class Technology

Class D amplifiers are also called “switching amplifiers”, since their efficiencies are arrived at by rapid on and off switching of the output transistors. Audison Class D uses a much higher switching frequency than most other amplifiers. You might think the switching frequency for all Class D amps are the same, but Class D chipsets allow significant latitude in many design aspects, such as switching frequency and timing. Most companies use as low a switching frequency as possible – this makes the timing easier to manage, and allows the use of lower-precision components which cost less. ACD uses a switching frequency twice as fast as many other modern Class D amplifiers. Higher switching frequencies require incredibly precise timing, which require higher-tolerance components to be used in order to keep the timing pulses from overlapping (that causes catastrophic failure of the output transistor). Audison uses very high-tolerance component parts to keep the timing correct even during temperature extremes (temperature changes shift the values of analog components). To Audison, this is worth the cost, since the higher switching frequency of Audison Class D moves noise much farther away from the audible band.

Audison Class D also uses a steeper 4th-order analog lowpass filter, rather than the simpler 2nd-order lowpass filters usually used in competing designs. The steeper filter will keep noise much lower in amplitude – which is good for controlling EMI and for preventing infrasonic noise getting to the tweeters. It also keeps phase shift outside the audible range. The cost is higher – twice as many components are needed for a 4th order filter compared to the usual 2nd-order filter, and each output channel needs its own filter – but Audison determined through exhaustive listening testing that this design was the best-sounding approach.


There are no reviews yet.

Be the first to review “Audison SR1.500.2 1000 Watt amplifier”

Your email address will not be published. Required fields are marked *

Additional information

Amplifier Class

Bass Knob

Sold Separate



1 Channel Mono

Compact Design

Minimum Impedance (ohms)

2 Ohms

Power: RMS Per Channel